GNSS ADHESIVE SMA ANTENNA PR1KSG30

The Teltonika PR1KSG30 is an adhesive GNSS antenna with an SMA connection. Select it when the planned equipment requires a GNSS antenna with this connection type, after confirming the exact device interface in current Teltonika documentation.

Before mounting, identify the location and orientation recommended for the connected equipment and verify that the cable can reach the SMA socket without tension, crushing or sharp bends. Inspect the antenna, cable, connector and intended mounting surface before starting. Prepare the surface and apply the adhesive antenna according to the manufacturer’s instructions; confirm the final position before making adhesive contact. Route and secure the cable without pulling on the antenna or connector, and leave the SMA connection accessible for inspection. After placement, check that the antenna remains firmly attached, the cable is supported and the SMA connector is correctly seated. Record the product code and mounting position for later service checks.